Waterwheel can be used as a supporting device for your generator. As we know that generator changes the mechanical energy to electrical energy. The waterwheel helps you to provide mechanical energy for your generator.
These are some component that you need to prepare:
Drill Electric
-50 cm PCV pipe 2 inches
-A stalk of bolt 4 mm (length 1 m) + 12 nuts.
-Iron plate (thickness 0.9-1 mm) measured 19 × 19 cm.
-2 pieces bearing, number 608ZZ
-2 wide board length 22 cm wide (usually) 19.5 cm
-A stalk of bolt 6 mm (length 1 m) + 10 nuts for the axle.
-Drill fan 10 mm and 21 mm. Drill steel 4 mm, 6 mm and 8 mm (or buy one set of them, it is much cheaper).
-½ kg of resin and 1 ons of fiberglass catalysts
-A little thin aluminum
Making the turbine:
1. Form the iron plate into a round shape you can also make it octagon shape make it into 20 angles. Measure it 5 cm from the center point. Mark in each 90 degrees then drill it with 6 mm drill. Then, drill the center point with 8 mm drill.
2. Cut 4 mm rod bolts (key 10) into 4 pieces. Cut also 6 mm bolt bar (key 12) for 40 cm.
3. Divide the PCV pipe into 4 parts lengthwise. You can measure the pipe using HVS paper. Wrap the pipe with the paper (same length with the pipe) then divide the paper into 4. Then, wrap again the pipe and mark the length of the paper on the pipe. Cut 10 cm pipe into 5 pieces then cut each pieces into 4 so you will get 20 pieces of pipe.
4. Tide the 4 mm bolt and nuts in and outside on the every hole. Measure each bolt for the same height. You would better not to tide the bolt so that you can set the PCV easily.
5. Tide the 6 mm bolt, measure the rear exit should be 5 cm, the remaining is forwarded, tide it with nut inside out.
6. Make sure you have 4 hollow when you assemble it. Those hollows will be used to take in the resin. You should cover inside of the PCV with mixed resin and catalyst except the bolt and nut.
7. After all the PCV is mounted coated and dried, remove all 4 mm screws from the plate. Cut the aluminum for about 6 mm as wide as the bearings. Wrap it to the bolts; put the bearings inside, press by the nut till it is fixed. Do this for both bearings. This will make the bearings attached tightly to the bolt (Axle).
Making the house
Cut the board into two equal sizes (@ 19.5 x 22 cm). Point the center out then divide each board into 4 parts. Combine these two boards; drill the corner of each as a guide with 6 mm drills. Drill the center point with 4 mm drill. Separate the board. Drill each of the boards' center with 21 mm fan board within 5 mm. you should also drill the center point with 10 mm fan drill. Combine all of them using 4 mm rod bolts. Make sure that the turbine rotates freely. You can cover it with aluminum plate or fiber.
Christmas Sales Black & Decker LDX112C 12-Volt Max Lithium-Ion Drill/Driver 201
Dec 13, 2011 01:08:52
Click for larger image and other views
Christmas Sales Black & Decker LDX112C 12-Volt Max Lithium-Ion Drill/Driver Feature
- Lithium-ion battery holds charge longer between use and has longer cycle life
- 11-position clutch provides precise control for drilling into wood, metal, and plastic, and for all screwdriving tasks
- Compact and lightweight for less user fatigue and for drilling and screwdriving in confined spaces
- Variable speed allows countersinking without damaging material
- Anti-slip soft grip provides comfort when using the drill
Christmas Sales Black & Decker LDX112C 12-Volt Max Lithium-Ion Drill/Driver Overview
Russell Hobbs LDX112C Cordless Drill LDX112C DrillsChristmas Sales Black & Decker LDX112C 12-Volt Max Lithium-Ion Drill/Driver Specifications
Black & Decker’s LDX112C 12-volt MAX lithium-ion drill/driver packs a powerful punch in a compact frame thanks to its long-lasting lithium battery, lightweight construction, and ergonomic features that increase comfort and productivity. Ideal for household jobs like building furniture, changing cabinet hardware, or hanging artwork, the LDX112C easily fits in tight spaces and provides enough torque (up to 100 inch-pounds) to handily complete tasks on your honey-do list.
|
 The LDX112C 12-volt MAX lithium-ion drill/driver is ideal for household projects, from hanging artwork to changing hardware to building furniture. View larger |
Black & Decker’s exclusive Smart Charge Technology combines seamlessly with the powerful 12-volt lithium-ion battery in the LDX112C to provide a charge that lasts up to 500 days in between uses–that’s five times the battery life of previous comparable NiCd models. By providing an extra level of control, the 11-position clutch helps to prevent the stripping of screws. Practical construction features include an LED work light that illuminates the work surface for easier drilling in dark places and a soft-grip handle for added comfort during use. The 3/8-inch chuck makes for quick and easy bit changes, and the on-board bit storage provides easy access to the screwdriver bit.
About Black & Decker
Since 1910, Black & Decker has been setting the standard for innovation and design of power tools, accessories, outdoor yard care equipment, home cleaning products, automotive and lighting products, hardware and home improvement products, and technology-based fastening systems. The inventor of the first portable electric drill with pistol grip and trigger switch, Black & Decker has evolved from a small machine shop in Baltimore, Maryland, to a global manufacturing and marketing powerhouse with a broad line of quality products used in and around the home and for commercial applications.
What's in the Box
One Black & Decker LDX112C 12-volt MAX lithium-ion drill/driver with one battery, one charger, and one double-ended bit tip.
 |  | |
| The LDX112C comes equipped with a long-lasting 12-volt lithium-ion battery and an LED light to illuminate work surfaces. (Click each to enlarge) | ||
SAVE NOW on Christmas Sales Offers below!
Available In Stock. |
| This Christmas Black & Decker LDX112C 12-Volt Max Lithium-Ion Drill/Driver ships for FREE with Super Saver Shipping. |
Price : Click to Check Update Prices Please. |
